Venturo HT40KX Hydraulic Crane

| January 31, 2017

The Venturo HT40KX is fully hydraulic, and features 20′ full-hydraulic extension boom with capacity-overload shut-off system, anti-two-blocking system, remote control pendant with 25 ft. cord and load block with swivel hook safety latch.

CAPACITY: 6,000 lb

RATING: 40,000 ft lb; maximum lifting capacity of 6,000 lb at 6 ft


  • 6,000 LBS Lifting Capacity
  • 40,000 FT-LBS crane moment rating
  • Fully Hydraulic Power
  • Hexagonal Boom Construction
  • 400 Degree Power Rotation
  • Meets ANSI B30.5 Safety Standards
  • Meets OSHA 1910.180 Requirements

HT40KX (Proportional) Standard Feature Group:

  • Proportional Control Valve
  • Pendant with Variable Speed Trigger Switch
  • Fully hydraulic boom extension 10 – 20 ft
  • High Speed Winch: 60 ft/min
  • Hydraulic Requirements: 12 GPM, 25 gal. Reservoir

HT40KX (Non-Proportional) Basic Feature Group Available at Significant Savings:

  • Non-proportional Valve Control
  • Pendant with Pre-Set Speed Toggle Switches
  • Single-Stage Hydraulic Extension 10 – 16 ft
  • Manual Boom Extension 16 – 20 ft.
  • Winch Speed: 18 ft/min
  • Hydraulic Requirements: 2.6 GPM, 10 gal. reservoir


  • Capacity Overload Shut-Off System
  • Anti Two-Blocking System
  • 100 ft. of 3/8″ Aircraft-Quality Wire Rope
  • Remote Control Pendant: 25 ft. Cord and Quick Disconnect (Optional Wireless Controller Available)
  • Load Block with Swivel Hook Safety Latch


  • 14,500 lb. GVWR Chassis
  • Outriggers: Front and Rear
  • PTO, Pump and Reservoir


    • Proportional Controls – Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display. Includes battery recharger. Can be purchased in lieu of standard remote or in addition of standard remote.
    • Non-Proportional Controls – Wireless pistol grip transmitter and compartment mounted receiver with troubleshooting error code display.
    • Includes pendant switches, wiring harness and relays to supply a 12V or ground signal to the engine compartment. Does not include an auxiliary electric or vacuum speed controller. (Available ONLY with Proportional Controls.)
    • Paint code/sample required for custom paint jobs.
  • PUMPS (hoses/fittings not included)
    • Model: HT40KX
    • GPM: 2.6 @ 1000 RPM
    • Pump Type: A Flange, 5/8″ – 9 Spline
    • Model: HT40KX-P
    • GPM: 12 @ 1200 RPM
    • Pump Type: B Flange, 7/8″ – 13 Spline
  • RESERVOIRS (hoses/fittings not included)
    • 10 or 25 GAL. Bulkhead Mount
    • Reservoirs include 100 mesh suction scree, 10 micron return filter, return and supply pressure gauges, sight glass and breather cap.

All-New HT40KX Hydraulic Crane Technology

As part of our many 2017 R&D initiatives, Venco Venturo will be redesigning its entire HT hydraulic crane line, starting with the HT40KX. Major technological improvides will include:

  • V-PRO enhanced safety and control system that will include precise moment overload set points, system status display, capacity alerts and automatic stability/grade control.
  • Increased maximum capacity to 7,500 lbs.
  • Reduced weight through the use of light-weight high-strength steel.
  • Longer and lighter booms through the use of European-style, one-piece hex booms.

Stay tuned for releases as they come available.

Venco VenturoVenco Venturo Industries LLC
12110 Best Place | Cincinnati, Ohio 45241
800-226-2238 |

Print Friendly, PDF & Email


Category: Featured Products

Visit Our Other Brands: