VERSABLOCK Pipe Supports

| December 21, 2015

VERSABLOCK – Pipe Support System

Versablocks allow you to secure pipe ortubing with strut clamps, without cutting and installing strut.

Versablock 600 versablock bridgeMake a Versablock Bridge with strut for multiple pipe runs. Piping can be secured with strut clamps or Saddles which allow for thermal expansion of piping.

Single or double pipe runs may be secured with the Saddle. The retainer snaps into the saddle without tools, and secures the piping, while allowing for thermal expansion. The saddle attaches to a Versablock with exterior rated screws.

The Versablocks nest tightly together for shipping and handling. By rotating one Versablock 90 degrees to the bottom one, a two inch height increase is achieved to compensate for roof crickets. This allows your piping to remain level and creates grade for condensate piping.

These fire resistant Versablocks are made from Polylac Pa-765.   The material is self extinguishing, it will char instead of dripping and smoke output is very limited as the self extinguishing characteristics stop the flame.

Versablock 600 versa with saddleStrut Clamps Without Strut!

Don’t waste time and money on strut. Versablocks and E-Block are designed to accept strut clamps without the use of strut.
Strong, lightweight and stable.

Versablocks are designed for up to 3″ SCO 40 pipe.  4″ and larger or multiple runs require bridging.

The Versa-Saddle is compatible with both  the Versablock and the E-Block.


Print Friendly, PDF & Email


Category: Featured Products

Visit Our Other Brands: